Dron first steps

In the first place we must know if our drone allows to fly in Indoor or outdoors, for this we must read the instructions carefully. It is important to charge the Drone's battery with the supplied charger in the box and ensure a good 100% charge.

We will look for a large place, where we can make the first flights without touching anything around, and first of all we will connect the Drone's battery and start it up, leaving it on the ground or a completely flat surface to stabilize it, then we will start the station and we will make the association of both parties until the lights are fixed and stop flashing, this will indicate that we are ready to fly.

To start the flight, we must be right in the tail (back) of the Drone, and slightly raising the stick on the left we will see that the engines start up, we will try to make flights between 1-2 meters high to familiarize ourselves with the I send.

The next step will be to take off and make small horizontal displacements and land again, this exercise is very important to control, because it is the basis of a good pilot, we must repeat them until we have them under control.

From here we will begin to make flights with lateral displacements, authorizations, and mix all these movements at once, in case of flying abroad, we must take into account the wind, as it can make our flight difficult, for it almost all Drones equip different speeds that allow us to counteract the strength of the air.