In the first place we must know if our drone allows to fly in Indoor or outdoors, for this we must read the instructions carefully. It is important to charge the Drone's battery with the supplied charger in the box and ensure a good 100% charge.

We will look for a large place, where we can make the first flights without touching anything around, and first of all we will connect the Drone's battery and start it up, leaving it on the ground or a completely flat surface to stabilize it, then we will start the station and we will make the association of both parties until the lights are fixed and stop flashing, this will indicate that we are ready to fly .........

It is very important to make a good maintenance of the drone, and even more of the batteries. To the drone we must clean it with a brush or dry cloth, without pressing too much so as not to damage the fuselage, dust particles can grate it. The gears can have small stones or other particles between the teeth, with a tool that has the fine tip can be cleaned with a lot of patience, being entertained in doing it by checking all the teeth of each one of the crowns.

The propellers are made of plastic and with the blows given in flight and stopped, they are damaged, it is necessary to keep them always in an optimal state for a good flight, all drones have these spare parts to change them, if necessary, you must keep in mind that each drone carries two propellers from each hand ......

It is necessary to control the regulations of each zone to know where we can fly with our drone and where it is restricted.

In Spain we must be attentive to AESA (State Aviation Safety Agency).