How to maintain a Slot Car
NINCO cars are ready to put on the track.
We recommend for all cars, to place the braids with a small curve in the back (Fig.1), for a better contact with the track, especially in the parts of the track that are not flat due to bridges or flush.
We must check the wear of the braids and change them if necessary (Fig.2)
We must check tire wear regularly.
To improve performance and prevent wear, we should periodically lubricate the bearings and crowns (Fig.3) of our vehicles. Some lubricants can damage some parts of the car, so we recommend using specific lubricants for modeling.
We will periodically check that the engine and the rear axle fit perfectly into the passenger compartment.