Electric motor

Before the start-up of our vehicle, we must carefully read the instructions, as each car may require specific attention for its correct operation.

We must charge the car's battery with the charger that comes in the box for this particular battery, taking into account the necessary hours especially for the first charge that normally should be slower and longer than the following. In most cases, if the car allows it, we will remove the battery from it to proceed with the charge. We must also put batteries or batteries in the station.

Now we can connect the battery of the car, and proceed to the first start of the station and then the car, we will always try to have the car up without the wheels touching the ground to prevent the car from running out for some reason of control and suffer some damage. Once verified that the car responds well to the turns of the steering wheel of the transmitter and the accelerator and brake, we will proceed to place it on the ground.

In the case that once placed on the ground, the car has a tendency to deviate towards one of the sides, by means of the TRIM we can neutralize this deviation, in the hobby cars we will find it in the transmitter (indicated in the instruction manual) , and toy cars, will be located on the underside of the chassis (indicated in the instruction manual).