First steps with a RC Helicopter

Once we have the helicopter loaded and we have found a large place without drafts, we will be ready to fly.

We will place the helicopter on the ground about 2 meters in front of us, and with the tail facing us, we will start it, either by connecting the battery or with the switch in ON position depending on the model, then the lights should be flashing.

Next, we will put the station in gear, and with the lever on the left, we will make a movement up and down to synchronize it with the helicopter, at this time the lights should be fixed in gear.

Now is the time to start flying, we will start accelerating little by little until take off, and only regulating the lever on the left, we will try to keep the helicopter about 1 meter above the ground. We will repeat this maneuver about 10 times until controlling this movement.

The next exercise would be to keep the helicopter in height and start moving sideways with the lever on the right. At all times we will try to avoid getting closer to the walls and ceiling, since we will create turbulence and damage our control of the device.

Demonstration video

https://www.youtube.com/watch?v=QxCfNnefLHg